top of page

How to Check If Your EV Charger Needs an Electrical Certificate

James Lee
Nov 6
9 min read

Last Updated: 5 November 2026

Quick Summary

Most home EV charger installations in the UK do need an electrical certificate, and the installer should issue one when the work is finished. A proper ev charger certificate records that the work was tested and is safe, and which document applies depends on whether a new circuit was added or an existing one was changed.

  • A new dedicated circuit from the consumer unit normally needs an Electrical Installation Certificate.

  • Like-for-like charger replacements on an unchanged circuit are usually covered by a minor works certificate.

  • An EICR is a periodic condition report on the existing installation, not an installation certificate.

  • Notifiable work also needs a Building Regulations completion certificate, separate from the electrical certificate.

  • Do not accept an installer who leaves without giving you a certificate; ask for it in writing.

Table of Contents

Most home EV charger installations in the UK do need an electrical certificate, and the installer should issue one when the work is finished, because a proper ev charger certificate is the record that proves the work was tested and safe.

Ask yourself one question first: did the installer add a new circuit, or did they change something that already existed? That answer decides which document you should expect.

Treat any installer who leaves without giving you an ev charger certificate as a warning sign.

Identify Which Certificate Your Installation Needs

Different jobs produce different paperwork, and the certificate you should expect depends on three things: whether a new circuit was created, whether an existing circuit was altered, and whether the work was notifiable under Building Regulations. Our guide to EV charger installer certifications explains which qualifications and certificates apply to each case. Use the decision guide below to work out which document applies to your installation.

Certificate-by-certificate decision guide

What was done

Document to expect

Who issues it

A new dedicated circuit run from the consumer unit to the charger

Electrical Installation Certificate (EIC)

The installing electrician

An existing circuit altered, extended or reused for the charger

EIC, or a minor works certificate if the scope is limited

The installing electrician

A like-for-like charger replacement or a repair that does not alter the circuit

Minor works certificate

The installing electrician

Notifiable work under Building Regulations

Building Regulations completion certificate, in addition to the electrical certificate

The competent-person scheme operator or local building control

An existing installation being assessed for continued safe use

Electrical Installation Condition Report (EICR)

A qualified electrician, separately from the charger work

An EIC is the full document for new circuit work. It records the design, the installation, the inspection and the test results, and it is signed by the person taking responsibility for each part. A minor works certificate is a shorter document for work that does not extend or alter the circuit's characteristics. An EICR is not an installation certificate at all: it is a periodic condition report on the existing installation, and it does not certify the charger work.

New circuit versus existing circuit

Most domestic charger installations need a dedicated circuit from the consumer unit, often protected by its own RCBO or MCB and RCD. Because that is new circuit work, the installer should test it and issue an EIC.

Watch out: a plug-in granny charger used from a domestic socket is not a substitute for a properly installed circuit, and it does not generate an installation certificate. If you are relying on a three-pin socket, ask the installer to confirm in writing what circuit protection is in place.

Replacement, repair and landlord-owned equipment

A like-for-like charger replacement on an unchanged circuit is usually minor work and should be covered by a minor works certificate. Repairs that touch the wiring, the protective device or the earthing may need fuller testing and an EIC. Landlords should keep every certificate with the property records and confirm in writing who is responsible for future inspection and testing. Workplace chargers fall under a different regime again, because the installation is not a dwelling, so the duty holder should confirm what records their insurer and enforcing authority expect.

Differences across the four nations

Building Regulations and notification arrangements are not identical across the UK. In England and Wales, notifiable electrical work in dwellings is typically self-certified through a competent-person scheme, with the scheme operator issuing the Building Regulations completion certificate. Scotland has its own building standards system and different notification routes, and Northern Ireland has separate building control arrangements. Before work starts, ask the installer which nation's regime applies to your property and which body will issue the completion certificate. A certificate that is correct in one nation may not be the document your local building control expects in another.

EV Charger Installation Certificate: What It Covers

An EIC confirms that the new circuit was designed, installed and tested to the standard in BS 7671, the Wiring Regulations. It sets out the circuit details, the protective devices fitted, and the results of each test.

Electrician reviewing a printed EV charger certificate beside a wall-mounted home charging unit in a UK garage

Look for these items on the certificate:

  • The installer's name and registration details

  • The circuit description and cable size

  • The protective devices, including RCD protection

  • Test results for earthing, insulation and continuity

  • The signature of the person who takes responsibility for the design and the installation

Watch out: A certificate with blank test fields is not a finished document. Ask the installer to complete every section before you pay the final invoice.

EV Charger Electrical Safety Testing and What the Results Show

Testing shows whether the installation is safe to use. The installer checks the earthing, the insulation resistance and the protective devices, then records each reading.

Good test results mean the circuit should cut off quickly during a fault. Poor results mean the installer must fix the problem before the work is signed off. Ask to see the figures, not just a tick in a box.

Testing matters most for:

  • Earth loop impedance, which shows how well the fault path works

  • Insulation resistance, which shows whether cable coverings are intact

  • RCD operation, which shows the device trips at the right speed

An EICR is a different document. An EICR is a periodic inspection report for the whole installation. Your installer may recommend one if the consumer unit is old or if the property has had several alterations.

EV Charger Building Regulations: When Notification Applies

Building Regulations set minimum standards for safety, energy efficiency and structural work in buildings. For a domestic charger installation, the relevant question is usually whether adding the circuit is notifiable work, because notifiable work must be either self-certified through a competent-person scheme or inspected by local building control.

When notification usually applies

Notification normally applies when a new circuit is added to a dwelling. Many domestic charger installations fall into that category because they need a dedicated supply from the consumer unit. If the installer is registered with a competent-person scheme, they can self-certify the work and notify the scheme operator, who then issues the Building Regulations completion certificate. If the installer is not registered, the work must be notified to local building control before it starts, and building control will inspect and certify it.

What the completion certificate is, and what it is not

The completion certificate is a Building Regulations document. It is not the same as the EIC or minor works certificate that records the electrical testing. A complete handover for a notifiable installation therefore normally includes two things: the electrical certificate for the circuit, and the Building Regulations completion certificate. Keep both with your property records. The completion certificate is the document a buyer's solicitor is most likely to ask for when the property is sold.

How the nations differ

England and Wales operate a competent-person self-certification route for notifiable electrical work in dwellings. Scotland has its own building standards regime and a different notification process, and Northern Ireland has separate building control arrangements. Do not assume that a certificate issued under one nation's scheme will satisfy building control in another. Ask the installer, before work begins, which nation's rules apply and which body will issue the completion certificate.

How to check whether notification happened

If you are unsure whether your installation was notified, start with the installer and ask for the scheme operator's name and the notification reference. If the installer cannot provide it, contact the scheme operator directly with the installer's registration number and the installation date. If no notification exists, contact your local building control office and ask about a regularisation application for the work.

Watch out: a regularisation application can be refused if the work does not meet the standards in force, so it is better to confirm the notification route before the installer starts rather than after.

EV Charger Installation Without a Certificate: What to Do Next

If you already have a charger but no paperwork, act now. Do these steps in order:

  1. Ask the installer whether they tested the circuit and issued a certificate.

  2. Request a copy of any EIC, minor works certificate or completion certificate.

  3. Check with your local building control office whether the work was notified.

  4. If nothing exists, book a qualified electrician to inspect and test the installation.

  5. Keep every new document with your property records.

Most gaps can be fixed without rebuilding the installation. The electrician will test the work and issue the correct certificate if it passes.

Booking Your Home Charger Installation and Getting Your Paperwork

When you book with Yorks Ev, we confirm the certificate type before work starts, so you know what paperwork to expect. If you are wondering whether a normal electrician can install an EV charger, the answer depends on the installer's qualifications and whether they can issue the correct certificate. To plan your budget, see our guide to EV charger installation cost for what the installation and certification will realistically cost.

If you are unsure whether your installation needs an EIC, a minor works certificate or notification, get a quote and we will confirm what applies to your home. You can also book a charger installation directly. Before you decide, read our guide to EV charger installer certifications to see which qualifications matter, and check whether a normal electrician can install an EV charger so you know who should do the work.

Yorks Ev also covers flexible payment options, including Klarna, so the cost of your installation can be spread if that suits you. For a realistic idea of budget, read our guide to EV charger installation cost before you request your quote.

Frequently Asked Questions

Do I need an electrical safety certificate for a home EV charger?

In most cases, yes. A new EV charger is a new circuit, and under BS 7671 (the wiring regulations) the installer should issue an Electrical Installation Certificate once the work is inspected and tested. The certificate records the design, the installation and the test results. Ask for it before you pay the final invoice, and keep it with your house paperwork. If the installer cannot provide one, treat that as a warning sign and check the company's registration with a competent-person scheme or a recognised body before going ahead.

Does installing an EV charger need building regulations approval?

It depends on where you live and how the work is done. In England, most fixed electrical work in dwellings is covered by Part P of the Building Regulations, and installers registered with a competent-person scheme can self-certify the work to building control rather than notifying the council first. Scotland, Wales and Northern Ireland have their own rules and notification routes, so check the position for your nation. A registered installer will normally handle this step for you.

What should I do if my installer did not provide a certificate?

First, ask the installer in writing for the Electrical Installation Certificate and any building control or competent-person registration details. If they cannot or will not provide them, check whether the installer is registered with a competent-person scheme. Where the work was never certified, a qualified electrician can inspect and test the installation, and an EICR can record its condition. Keep all receipts and correspondence, and speak to your insurer and conveyancing solicitor if you plan to sell.

Can I install an EV charger myself?

Installing the charger, wiring it or altering the consumer unit is notifiable electrical work, and in practice it should be done by a competent, qualified electrician. Doing it yourself can invalidate home insurance and make the property harder to sell, because no compliant certificate can be issued for the work. Yorks Ev uses highly qualified, time-served, UK-trained electricians for domestic installations. For current pricing and availability, see the Yorks Ev website or request a quote.

 
 
 

Comments


bottom of page