Can a Normal Electrician Install an EV Charger?
Table of Contents
Can a Normal Electrician Install an EV Charger?
EV Charger Installer Qualifications: What to Look For
EV Charger Installation Certification and Approval Schemes
EV Charger Electrical Safety Checks Before Installation
How Long Does EV Charger Installation Take?
When to Hire a Specialist vs a Normal Electrician
Frequently Asked Questions
Last Updated: 13 October 2026
Can a Normal Electrician Install an EV Charger?
Can a normal electrician install an EV charger? Yes, provided they hold the right qualifications and follow the correct approval process. This guide from Yorks Ev breaks down exactly what those requirements are, so you know what to ask before you book anyone.
The key point most homeowners miss is that "electrician" is not one single skill set. A domestic installer who wires sockets and lights all day may be perfectly competent, but a home EV charger is a different job. It draws high current for hours at a time. It needs protection against earth faults that ordinary circuits do not.
So the honest answer is: a normal electrician can do it, but only if they have the specific training for it.
Below, we will show you what to check, what the job involves, and when you genuinely need a specialist.
Key Takeaway A "normal" electrician can install an EV charger if they hold the correct qualification for the work and can demonstrate it. The qualification matters more than the job title.
EV Charger Installer Qualifications: What to Look For
The main thing to look for is a recognised qualification in electric vehicle charging equipment installation. This is not a general wiring certificate. It is a specific course covering how chargers work and how they must be protected.
When you speak to an installer, ask them directly:
Do you hold a current EV charging installation qualification?
Are you registered with a competent person scheme?
Can you show your public liability insurance?
Have you installed this exact model before?
A competent person scheme lets an installer self-certify their work (Building regulations approval: Use a competent person scheme). That means they notify the local building control body on your behalf. If they cannot do this, you may be left to arrange the notification yourself.
Ask for the certificate, not just a verbal yes. A good installer will have it ready.
Watch Out Hiring someone who wires the charger like a standard outdoor socket is a real risk. An EV charger runs at high current for hours, and without the correct protection a fault can damage the charger, the car, or worse.
EV Charger Installation Certification and Approval Schemes
Certification and approval schemes are how you confirm an installer is genuinely allowed to sign off the work. Two things matter here: their personal qualification, and their registration with a recognised scheme.
Most reputable installers belong to a government-approved competent person scheme. Membership means an independent body has checked their work and their paperwork. It also gives you a route to complain if something goes wrong.
Here is what to confirm before you commit:
What to Check | Why It Matters | How to Confirm |
EV charging qualification | Proves specific training, not just general wiring | Ask to see the certificate |
Competent person scheme | Lets them self-certify and notify building control | Ask for their scheme name and number |
Insurance cover | Protects you if something is damaged | Request a copy of the policy |
Prior installs | Shows real experience with your charger type | Ask for references or photos |
If an installer dodges any of these questions, treat it as a warning sign. The paperwork is not a formality. It is your protection.
Pro Tip Ask for the scheme registration number and check it on the scheme's own website. It takes two minutes and confirms the installer is genuinely registered, not just claiming to be.
EV Charger Electrical Safety Checks Before Installation
Before any charger goes on the wall, the installer must check your existing electrical supply. This is the step that separates a proper job from a rushed one.
The checks usually include:
Testing the earthing arrangement at your property
Checking the capacity of your consumer unit
Confirming the main fuse rating
Looking at cable routes from the supply to the charger point
Assessing whether your supply needs an upgrade

These checks matter because a charger adds a large, steady load. If your earthing is not suitable, the installer may need to fit additional protection. In some homes, the supply itself may need attention first.
The IET wiring regulations guidance set out the safety standards that apply to this kind of work. A good installer will talk you through what they find before they start, not after.
How Long Does EV Charger Installation Take?
A straightforward home installation usually takes a few hours, often around half a day. The job itself is rarely the slow part.
What actually affects the timeline:
Cable route: A short run through a garage is quick. A long run across a garden or through walls takes longer.
Consumer unit capacity: If your board needs changes, add time.
Earthing setup: Some properties need extra protection fitted.
Supply upgrades: If your incoming supply needs work, this can add the most delay.
At Yorks Ev, our standard supply and installation package includes all materials, labour and VAT, and we complete installations within 14 days. That covers most homes. If your property needs extra work, we tell you upfront rather than surprising you later.
The honest caveat: no installer can promise a fixed timeline before they have seen your electrics. Anyone who does is guessing.
When to Hire a Specialist vs a Normal Electrician
Hire a specialist when your property has anything unusual about its supply, earthing, or cable routes. For a standard home with a modern consumer unit and a short cable run, a qualified electrician with EV training is perfectly capable.
Choose a specialist if:
Your consumer unit is old or full
Your earthing arrangement is unclear
The cable run is long or awkward
You want the charger, the paperwork, and the notification handled in one package
Choose a general electrician with EV training if your setup is simple and they can show the right qualification.
For most homeowners, the deciding factor is not the label on the van. It is whether the person can prove their training, handle the certification, and explain the safety checks clearly.
That is exactly how we work at Yorks Ev. We are a family-run business with highly qualified, time-served electricians. We offer fixed-price installations, no travelling charge across Yorkshire, and flexible payment options including Klarna.
Frequently Asked Questions
Does an electrician need special qualifications to install an EV charger?
Yes. While any qualified electrician can physically wire a charger, most manufacturers require specific training for warranty validation. The installer should hold relevant City & Guilds qualifications and be registered with a competent person scheme. For grant-funded installations, the installer must also be approved under the relevant government scheme. Always ask to see their certification before work begins.
Can I install an EV charger myself?
No. Installing an EV charger involves high-voltage connections and must comply with BS 7671 wiring regulations. It is not a DIY task. Any installation must be carried out by a qualified electrician who can issue the required electrical installation certificate and notify the local building control body if needed. Attempting a DIY install risks electric shock, fire, and invalidates your home insurance.
How long does EV charger installation take?
A standard home installation typically takes a few hours for a straightforward job. However, if your consumer unit needs upgrading or the cable run is complex, it can take longer. Always confirm the timeline in writing before booking.
What certification should I receive after an EV charger installation?
You should receive an Electrical Installation Certificate (EIC) or a Minor Electrical Installation Works Certificate, depending on the work done. This confirms the installation meets BS 7671 standards. If the installer is part of a competent person scheme, they will also notify your local building control. Keep these documents safe for warranty and insurance purposes.
The real challenge is not finding an electrician. It is finding one who can prove they are qualified for EV charging work and will handle the certification properly.
At Yorks Ev, our time-served electricians complete installations within 14 days, include all materials, labour and VAT in one price, and cover Yorkshire with no travelling charge. Get a quote from Yorks Ev and get your home charger fitted with confidence.
Get a Quote



Comments